C9010 Dell Networking Switch 10 slot, includes 1x RPM, 1x AC PSU, 3x Fan Modules

Product

Description

Hardware

• Up to 240 line-rate1 1/10GBASE-T ports

• Up to 248 line-rate1 1/10GbE SFP+ ports

• Up to 60 line-rate1 40GbE QSFP+ ports

• 3 fan modules

• 4 2,900W power supplies

• Up to 2 RPMs

• 1 RJ45 console/management port with RS232 signaling and 1 USB-B port (per RPM)

• Size: 8 RU, 13.9”h x 17.4” w x 18.0” d (35.26 cm h x 44.20 cm w x 45.70 cm d)

• Weight: 55.4 lbs (25.2 kg) empty, 151.3 to 165.3 lbs (68.8 to 75.1 kg) fully loaded, depending on line cards installed

Environmental Operating Conditions

• Max. operating specifications:

  • Operating temperature: 32° to 113°F (0° to 45°C)

  • Operating humidity: 5 to 85% (RH), noncondensing

  • Operating altitude: 0ft to 10,000ft above sea level

• Max. non-operating specifications:

  • Storage temperature: –40° to 158°F (–40° to 70°C)

  • Storage humidity: 5 to 95% (RH), non-condensing

Performance

• MAC addresses: 160K

• IPv4 routes: 128K in scaled mode (16K in default mode)

• IPv6 routes: 32K (shared CAM space with IPv4)

• RPM switch fabric capacity: 2.56Tbps (full-duplex), 1.28Tbps (half-duplex)

• RPM throughput: 1,462 Mpps

• Line Card switch fabric capacity: 1.44Tbps (fullduplex), 720Gbps (half-duplex)

• Line Card throughput: 714 Mpps

• Link aggregation: 16 links per group, 128 groups per stack

• Queues per port: 8 queues

• Layer 2 VLANs: 4K

• MSTP : 64 instances

• VRF-lite: 32 instances (64 in future release)

• Line-rate Layer 2 switching: all protocols, including IPv4 and IPv6

• Line-rate Layer 3 routing: IPv4 and IPv6

• IPv4 host table size 32K

• IPv6 host table size 16K

• IPv4 Multicast table size 4K

• LAG load balancing: based on Layer 2, IPv4 or IPv6 headers

Redundant RPM

• C9000 RPM 2.56T, Redundant RP

Line cards

• C9000 24-port 10GbE 10GBASE-T Line Card

• C9000 24-port 10GbE SFP+ Line Card

• C9000 6-port 40GbE QSFP+ Line Card

Redundant power supplies

• C9000 2,900W Power Supply

Fans

C9000 Hot Swappable Fan Module

Power

• Nominal Input Voltage: 100/120 VAC 50/60 Hz and 200/240 VAC 50/60 Hz

• Max input current per power supply @ 1,450W (100/120V): 16A at 100V, 14A at 120V

• Max input current per power supply @ 2,900W (200/240V): 16A at 200V, 14A at 240V

• Max system power input (using 4 power supplies): 2,950 VA

• Max. power consumption: 2,950W

• Max. thermal output: 10,066 BTU/hr

• Typ. power consumption: 1410-2400 Watts fully loaded, depending on line cards installed

Regulatory

• Safety

  • UL/CSA 60950-1, Second Edition

  • EN 60950-1, Second Edition

  • IEC 60950-1, Second Edition Including All

  • National Deviations and Group Differences

  • EN 60825-1 Safety of Laser Products

  • Part 1: Equipment Classification Requirements and User’s Guide

  • EN 60825-2 Safety of Laser Products

  • Part 2: Safety of Optical Fibre Communication Systems

  • FDA Regulation 21 CFR 1040.10 and 1040.11

• Emissions

  • Australia/New Zealand: AS/NZS CISPR 22: Class A

  • Canada: ICES-003, Issue-4, Class A

  • Europe: EN 55022: (CISPR 22:), Class A

  • Japan: VCCI Class A

  • USA: FCC CFR 47 Part 15, Subpart B: Class A

• Immunity

  • EN 300 386 EMC for Network Equipment

  • EN 55024

  • EN 61000-3-2: Harmonic Current Emissions

  • EN 61000-3-3: Voltage Fluctuations and Flicker

  • EN 61000-4-2: ESD

  • EN 61000-4-3: Radiated Immunity

  • EN 61000-4-4: EFT

  • EN 61000-4-5: Surge

  • EN 61000-4-6: Low Frequency Conducted Immunity