Hiện chưa có sản phẩm nào trong giỏ hàng của bạn
FortiAP U423EV (FAP-U423EV)
Liên hệ
- Mã sản phẩm: FAP-U423EV
Digitechjsc cam kết
100% sản phẩm chính hãng, đầy đủ CO, CQ
100% giá cạnh tranh so với thị trường
Chính sách bán hàng và bảo hành
Giao hàng trên toàn quốc
Hỗ trợ các đại lý và dự án
Bảo hành, đổi trả nhanh chóng
Hỗ trợ kỹ thuật chuyên nghiệp
Chính sách hậu mãi đầy hấp dẫn
Các điểm truy cập FortiAP WIFI U423EV hỗ trợ 802.11ac mới nhất Chuẩn sóng 2, với tốc độ dữ liệu tối đa lên đến 3,4 Gbps. Bổ sung các tính năng bao gồm định dạng chùm truyền rõ ràng 802.11ac (TxBF), MU-MIMO và hơn.
Thiết bị mạng không dây FortiAP U423EV
|
Hardware |
|
|
Hardware Type |
Indoor Universal AP |
|
Number of Radios |
2 |
|
Number of Antennas |
8 RP-SMA External and 1 Bluetooth/BLE Internal |
|
Peak Antenna Gain |
3 dBi for 2.4 GHz, 3 dBi for 5 GHz |
|
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
|
Frequency of Radio 1 |
2.4 GHz b/g/n 20/40 MHz (64 QAM) |
|
Frequency of Radio 2 |
5 GHz a/n/ac 20/40/80/160 MHz (256 QAM) MU-MIMO 3 simultaneous devices |
|
Maximum Data Rate |
Radio 1: up to 600 Mbps |
|
Radio 2: up to 1,733 Mbps |
|
|
Tx/Rx Streams |
4x4 MIMO 4 spatial stream |
|
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
|
Ethernet Ports |
2x GE RJ45 |
|
USB Port |
1x Type A |
|
Serial Console Port |
1 RS-232 x RJ45 |
|
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at (2x2 @ 17 dBm with 802.3af; USB disabled) |
|
Simultaneous SSIDs |
16 (14 if background scanning enabled) |
|
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
|
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist |
|
Maximum Tx Power |
2.4 GHz: 28 dBm / 630 mW (4 chains combined) |
|
5 GHz: 26 dBm / 398 mW (4 chains combined) |
|
|
Physical Security |
Kensington Lock |
|
IEEE Specifications |
802.11a, 802.11ac, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1x, 802.3af, 802.3at, 802.3az |
|
Wireless Mesh Capable |
Yes |
|
FortiPresence Capable |
Yes |
|
Modes of Operation |
WLC 8.2 (min.), FortiGate, (FortiCloud – Future) |
|
SSID Types Supported |
Local-Bridge, Tunnel & Mesh (when managed by FortiGate) |
|
FortiDeploy and FortiCloud Key |
Yes |
|
Per Radio Client Capacity |
Up to 256 |
|
LED Off Mode |
Yes |
|
Advanced 802.11 Features |
|
|
802.11ac MU-MIMO Wave 2 |
Yes |
|
Transmit Beam Forming (TxBF) |
Yes |
|
Low-Density Parity Check (LDPC) Encoding |
Yes |
|
Maximum Likelihood Demodulation (MLD) |
Yes |
|
Maximum Ratio Combining (MRC) |
Yes |
|
A-MPDU and A-MSDU Packet Aggregation |
Yes |
|
MIMO Power Save |
Yes |
|
Short Guard Interval |
Yes |
|
WME Multimedia Extensions |
Yes (4 priority queues for voice, video, data and background traffic) |
|
Wireless Monitoring Capabilities |
|
|
Frequencies scanned |
2.4 and 5 GHz |
|
Background scan with client access on 2.4 and 5 GHz |
Yes |
|
Full-time scan as dedicated monitor |
Yes |
|
Packet sniffer mode |
Yes |
|
Spectrum analyzer |
Yes |
|
Dimensions |
|
|
Length x Width x Height |
8.46 x 8.46 x 2.2 inches (215 x 215 x 56 mm) |
|
Weight |
3.4 lb (1.53 kg) |
|
Package (shipping) Weight |
5.36 lb (2.43 kg) |
|
Mounting Options |
Ceiling, T-Rail and Wall |
|
Included Accessories |
Ceiling, T-Rail and wall mount kit and 8 dipole antennas (AC power adapter sold separately) |
|
Environment |
|
|
Power Supply |
Adapter input: 100–240V, 50/60Hz, 0.9A Maximum output: 12V DC, 3A |
|
Power Consumption (Average / Maximum) |
24.5 W max power draw in 802.3at mode and 12.5 W max power draw when supplied with 802.3af mode (operates in 2x2 mode) |
